Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 125
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Switch parameter Description
STP Add an STP VLAN number in case that spanning tree support is
enabled
Repeater Enable/disable repeater support
The unit acts as a simple switch, relaying packets to all ports,
except the source port
IGMP Enable/disable IGMP snooping support
Please refer to the information provided in the next section for
details
Flood Allow/deny unlimited unicast flood without protection filter
Inband Allow/deny access to the device through in-band broadcast/
multicast management traffic
It is enabled by default
Mode Set the working mode of the switching group: normal, trunk, in-
trunk (give it the trunk group number created on the BS),
upstream, downstream
Normal (standard mode) - the switch group operation is based on
the configured Rules, packets are processed without modification
(this is the default option)
Trunk - the inbound traffic is untagged and placed into switch
groups in accordance with its VLAN tag
In-Trunk - allows filtering out the traffic that belongs to a certain
switch group that is a member of a trunk Switch Group
Upstream - used mainly in video surveillance systems for upstream
multicast flows
Downstream - used in video surveillance systems for downstream
traffic
Description Type a description sentence for the current switch group
Default Action Set the default action: permit/deny
In the absence of any Switching rule, or if a packet does not match
to any Switching rule, the default action for this group or interface
is taken