Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
13 https://wiki.infinetwireless.com/display/DR/WANFleX+-+Technical+User+Manual
Operation & Administration – 89
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Interface type Operations
sviX SVI interface is a logical L3 interface of the switch (solely used for the management of
the unit)
Configure the IP address(es) and the mask of the interface (as the management IP
address(es) of the unit)
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically (as the management IP
address(es) of the unit)
DHCP option is disabled by default
Set the interface description (up to 72 characters)
Remove the interface
Set the Switch group number which this interface is assigned to (bind the SVI
interface to a switch group)
prfX PRF interface makes the Ethernet interface that it is assigned to, to appear as a
regular RF interface in terms of the MINT network (for more information please refer
to the WANFleX OS User Manual
13
)
Configure the IP address(es) and the mask of the interface
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the parent interface to be transmitted the encapsulated packets (assign the PRF
interface to the physical Ethernet interface)
Set the channel number (from 0 to 3) on which the frames are sent and received by
the parent interface
Both PRF interfaces (of the two units in the link) must have the same channel
assigned in order to establish the wireless link
vlanX Configure the IP address(es) and the mask of the interface in case you use this
interface for the management of the unit, only (not recommended way)
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
Set the interface description (up to 72 characters)
Remove the interface
Set the parent interface to be transmitted the encapsulated packets
Configure the VLAN tag (or VLAN ID) for the current interface (from 1 to 4094)
In the drop-down window, you can select the vlan interface operation mode:
802.1q - vlan tag operations are performed according to this standard;
802.1ad - double tagging "QinQ";
802.1ah - backbone bridge using mac-in-mac technology described by the
IEEE 802.1ah-2008 standard.