Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 74
Once assigned, a priority is automatically recognized by every node inside the MINT network. Each priority value
corresponds to a device queue. Once in a queue, every packet is scheduled according to the queuing algorithm set
on the device. QM manager supports Strict Priority Queuingand Weighted Fair Queuingscheduling algorithms.
Strict Priority Queuingmeans that the packets from queue with lower priority are not processed until the queue
with higher priority is not empty. Weighted Fair Queuinguses weights for every queue of an interface and allows
different queues to have different service shares, depending on that weight.
Every channel is also characterized by the latency parameter. This parameter determines the maximum time for the
packets to stay in the channel. If a packet is waiting in a queue of the channel more than the time specified in the
latency parameter, then it is discarded. Latency can be set for each channel in the "Traffic Shaping (see page 125)"
section.
Channal Priority
BACKGROUND 16
REGULAR Best Effort 15
BUSINESS6 14
BUSINESS5 13
BUSINESS4 12
BUSINESS3 11
BUSINESS2 10
BUSINESS1 9
QOS4 8
QOS3 7
QOS2 6
QOS1 5
VIDEO2 4
VIDEO 3
VOICE 2
CONTROL 1
NETCRIT 0
10 Table - MINT priorities
Transparent packet prioritization is aWANFleXfeature which allows QM manager to transparently map 802.1p/
TOS/DSCP priority to MINT priority for the ease of deployment.
You have to make sure that “Dot1p Tags” and/or “IP ToS” options are enabled in the "QoS" section.