Install Instructions
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 73
Parameter Description
Corrupted
packets
Number of frames with the wrong length or structure
Transmit statistics
Packets Number of correctly transmitted packets
Fragmented Number of fragmented packets
Fragments Number of fragments
Load (kbps) The link load, Kbit/s
Load (pps) The link load, packets per second
Frame size
(bytes)
The frame size in bytes
Double
encapsulated
packets
Number of frames with double encapsulation
Out of fragbufs Number of errors as a result of frame assembly buffer overflow due to too many fragments
(neighbors) sources
For the SVI interface information about current status, RX and TX staistics is available.
32 Figure - General Statistics SVI
By clicking the «Close» button, you return to the "Device Status" page.
By clicking the «Reset» button, you clear all counters displayed in the page.
The "Auto Refresh" option is active by default and refreshes the statistics automatically. You can disable the auto
refresh.
QoSStatistics
QoS (Quality of Service) characterizes the entire network performance which is defined by the parameters such as:
throughput, latency, jitter, error rate, available bandwidth, etc. In order to provide the guaranteed Quality of
Service for certain applications, users or data flows, different prioritization methods are used.
The "QoSStatistics" tool displays the statistics of the MINT priority queues for the interface.
Priority is one of the parameters which define in what sequence, different types of data traversing every InfiNet
device in MINT network are treated. Each channel may be assigned a priority (for example: P01, P02 … P16).