Install Instructions
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Installation – 55
15 Figure - AUX-ODU-LPU-G Assembly Scheme
AUX-ODU-LPU-GMounting
AUX-ODU-LPU-Gcan be installed on a pole, using hose clamps. Attach the grounding cable (min cross-section 2.5
mm
2
) to the case, using grounding bolt.
CAUTION
Please note grounding cables should not be connected to the mast. All devices must use separate
grounding cable that should be connected to the grounding circuit. The best scenario is when grounding
cables are lined parallel to the Ethernet cable.