Install Instructions
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
58 https://wiki.infinetwireless.com/pages/viewpage.action?pageId=10780952
Troubleshooting – 155
•
•
•
>21 Recommended value
CINR (dB)
>28 Higher modulations are available
Absolute value Crosstalk (dB)
>20 Recommended value
If the value of the RSSI parameter remains high while the CINR value decreases, it may indicate high interference
levels near one of the devices.The deterioration of both the RSSI and the CINR parameters can indicate a
misalignment of the devices.A detailed description of the "Antenna Alignment" tool is available in the"Device
status menu(see page 64)"article.
Command line interface
When using the command line to manage the device, fine antenna alignment can be performed using the "ltest rf6.0
MAC ADDRESS -align
58
" command.The command output will show the average CINR for the local and the remote
devices.
108 Figure - "ltest - align" command output
8.5 Com mon errors in co nfiguration
Some device modes and options can significantly affect the link's stability and throughput.
Autobitrate and ATPC(see page 156)
Frame size(see page 156)
Packet retries management(see page 156)