Install Instructions
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 134
•
Mass upgrade monitoring
The mass upgrade progress can be seen in the System Log (Device Status section): the number of upgraded devices
and progress.
The remote devices will be rebooted after upgrade completion.The connection failure duration is approximately
35-40 seconds per device.
7.4.2 Upload
The "Upload" section allows you to upload other license, firmware and configuration files to the unit.
For each of the three options, click the «Choose File» button, followed by the «Upload» button after the file has been
picked up.
After clicking the «Upload» button, the system performs three operations: uploading, saving and validating the new
file uploaded and indicates if each of the operation succeeded or failed. In case that the process succeeded, you
have to reboot the unit in order to apply the new changes.
7.4.3 Download
The "Download" section allows you to download locally, to the management PC, the current license, firmware and
configuration files, by clicking the corresponding buttons: «Download License», «Download Firmware» and
«Download Configuration».
7.4.4 Bottom section of the page
The following buttons are available:
«Reboot» - reboots the device. A warning message pops up asking for the permission before the operation to
start. During the restart process, you are redirected to the login page and the timeout period of 35 seconds
counts down before the new login: