Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 129
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Parameter Description
Disabled Check this option in order to disable the command temporarily
30 Table - Extra commands
"Up/Down" arrows allow you to organize the command list
Click the «Remove Command» button if you want to delete the command from the list permanently
Click the «Add command» button if you want to add the command to the list
In the "Command Line" menu, the commands are only executed, but not saved into the configuration, while in
"Extra commands" section from "Basic Settings" menu, the commands are executed and saved into the
configuration.
7.4 Maintenance menu
The "Maintenance" menu allows you to perform service tasks for the device maintenance and to check the
hardware and software version, reason for the last reboot, system uptime, current configuration, license, diagnostic
card, etc.
"Maintenance" page has the following sections:
Firmware(see page 129)
SSL certificate installation(see page 130)
Firmware update(see page 131)
Mass firmware upgrade(see page 133)
Upload(see page 134)
Download(see page 134)
Bottom section of the page(see page 134)
7.4.1 Firmware
72 Figure - Firmware
Parameter Description
Firmware Version Displays the current firmware version
The firmware string contains also the hardware
platform type
Build Date Displays the firmware build date
Serial Number Displays the serial number of the unit