Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
26 https://wiki.infinetwireless.com/display/DR/CLI
27 https://wiki.infinetwireless.com/display/DR/WANFleX+-+Technical+User+Manual
Operation & Administration – 128
•
•
•
•
•
•
•
•
•
Traffic shaping rule parameter Description
Group Set the Switch Group number for the applying of the new
rule
The Switch Group must be prior created
Rule Set the packet capture filter
It is the same syntax called “PCAP expression”, as in the
"Switching" section
Refer to the filter expression syntax description above
Validate the rule by clicking the «Validate» button
29 Table - Traffic shaping rules
You can delete an existed traffic shaping rule by clicking the corresponding «Remove Rule» button.
7.3.10 Extra commands
The "Extra Commands" section allows you to take advantage of theCLIconfiguration flexibility within the Web
interface. While the Web interface is simple to use and understand, there are several parameters that can be
configured viaCLI
26
only.
The commands that do not have the enhanced parameters displayed in Web interface are:sys, ifconfig, prf, qm, tun,
route, mint, switch, svi, lag, sntp, dhcpc:
71 Figure - Extra commands
Parameter Description
Command Select the command to add it to the device configuration
Parameters Insert the string to specify the command parameters and options
Please refer to WANFleX OS User Manual
27
for the full explanation
of all command parameters and options
CAUTION
If any configuration changes are introduced via the Web interface later on, the configuration re-initializes
and all CLI configured parameters are reset to default. Use this section to add CLI specific commands to
the configuration in order to preserve the fine-tuning settings.
