Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 127
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Logical channel parameter Description
Priority Allocate the priority for all the packets going through a specific
rule:
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a lower
priority
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Redirect To Set the gateway IP address (only for the router mode)
The whole stream is redirected to the specified IP-address
regardless of the current routing configuration
It may be useful when the router serves as a network access
unit and two or more different clients want to access different
providers through one unit
Information Set a description for the logical channel created
28 Table - Logical channel parameters
You can delete an existed logical channel by clicking the corresponding «Remove Channel» button.
You can create a traffic shaping rule by clicking the «Add Rule» button.
Traffic shaping rule parameter Description
Channel Select the logical channel from the dropdown list
All the parameters of this rule are applied to this channel
Priority Set the priority for the packets going through the new rule of
the filter:
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Direction Set the input/output direction for applying the new rule:
“Input” - the rule is used to process inbound traffic
“Output” - the rule is used to process outbound traffic
and for post-routing packet filtering
Interface Set the interface for applying the new rule
All the available interfaces are displayed in the dropdown list
(physical and logical)
If “any” option is used, the rule is applied to all available
interfaces