Install Instructions
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 125
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
QoS
Parameter
Description
Dot1p Tags Enable/disable automatic prioritization for the packets tagged with IEEE 802.1p priority
tags
Detect and prioritize the packets using 802.1p tags
Enabled by default
Tunnel
Prioritization
Enable/disable automatic prioritization for the tunnel traffic
Allow prioritization within tunnels
MPLS Enable/disable automatic prioritization for the packets tagged with MPLS priority tags
IP DSCP Enable/disable automatic prioritization for the packets tagged with DiffServ priority tags
IP ToS Enable/disable automatic prioritization for the packets with a non-zero "ToS" field
Detect and prioritize the packets using IP ToS tags
TCP
Acknowledg
ments
Enable/disable automatic prioritization for TCP ACK packets
Automatically prioritize TCP acknowledgments
PPPoE Enable/disable automatic prioritization for the PPPoE tunnels traffic
ICMP
Prioritization
Enable/disable automatic prioritization for ICMP packets
Allow ICMP traffic prioritization
It does not increase the priority of "ping" packets (although they are ICMP packets)
27 Table - QoS
7.3.9 Traffic Shaping
The "Traffic Shaping" section allows to manipulate the data streams flowing through the device. Up to 200 logical
channels can be created, characterized by different properties (such as priority levels and data transfer rates), and
then the data streams can beassigned to these logical channels according to the special rules, previously created.
In order to configure distribution of the transmit ratebetween several channels, can be created the class.
In the default configuration, there is no channel or class created.
Create the classby clicking the"Add Class" button, to set the transmit rateredistribution for one or more channels.
Parameter Description
Class Service class number in the range 1-200
Max Maximal available transmit rate in Kbps
You can delete an existed class by clicking the corresponding "Remove Class" button.