Install Instructions

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 121
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SNMP access parameter Description
Version 1 enable Enable/disable SNMP v.1 and v.2c support
The first version of the SNMP protocol lacks security in the
operation of the protocol itself, which hinders its use for network
management, so SNMP v.1 and v.2c works only in read-only mode
By default, it is enabled
Community Set the community name for read-only mode (SNMP v.1 and v.2c
only)
The default SNMP v.1 and v.2c community name is "public"
It is a security method for SNMP v.1 and v.2c, as Agents can be set
to reply only to queries received by accepted community names
In SNMP v.1 and v.2c the community name passes along with the
data packet in clear text
Contact Set the contact information
Used as a reference information about the device owner
Location Set the geographical location where the unit is installed
Used as a reference information about physical device’s location
User Name Set the authorization user name of SNMP v.3
Password Set the authorization password of SNMP v.3
Security Set the security level:
the lowest level means no authentication or privacy (No
Authorization No Privacy), you have to set the User Name
only
the medium level means authorization and no privacy
(Authorization No Privacy), you have to set User Name and
Password
the highest level means authorization and privacy
(Authorization and Privacy), you have to set the User
Name, Password and Privacy Password
Read only Enable/disable the read-only permission
Read/Write is the default value
Admin Enable/disable the full access to the variables
For example: ability to reboot the device
Limited access is the default value