Instruction Manual

tina88e1-b (2014-09)

The standard IP address of the wireless network (default

192.168.0.240) can be changed via

• web interface "Configuration" (→  [4])

• RS232 ASCII interface with the commands FAP and CAP

(→  [2]):

SL> FAP

<list of networks> e.g. Inficon − Inficon

Mobile2

SL>CAP [SSID][|password]

e.g. CAP Inficon|mypassword

FAP command: Cube will scan available wireless networks.

The output is a list of SSIDs (network names).

CAP command: Cube will be connected to the wireless net-

work (state SSID and the network password). For networks

without a password only the SSID needs to be stated.

• Ethernet interface with REST services

− connect Cube with a computer via Ethernet cable (→  12)

− set the Ethernet interface of the computer to any IP

address in the subnet 192.168.0.248|255.255.255.0

(e.g. 192.168.0.247)

− open a web browser (e.g. Mozilla Firefox, version >20, or

Windows Internet Explorer, version ≥10.0)

− search for wireless networks with command

http://192.168.0.248:8087/1/cmd/FAP

The output is a list of SSIDs (network names), e.g. Inficon.

− connect Cube with the choosen network with command:

http://192.168.0.248:8087/1/cmd/CAP%20[SSID

|password]

For networks without a password only the SSID needs to

be stated.