Instruction Manual

tina88e1-b (2014-09) 29
Precondition
WLAN USB adapter is plugged in (the adapter is enclosed in the
scope of delivery). The initialization of the USB adapter takes
appr. 30 s. Thereafter the blue LED on the adapter lit solid or is
blinking.
The wireless network can be activated via
• RS232 ASCII interface with command WLA on:
SL> WLA on
W wla 1
SL>
• Ethernet interface with REST services
− connect Cube with a computer via Ethernet cable
− set the Ethernet interface of the computer to any IP
address in the subnet 192.168.0.248|255.255.255.0
(e.g. 192.168.0.247)
− open a web browser (e.g. Mozilla Firefox, version >20, or
Windows Internet Explorer, version ≥10.0)
− search for wireless networks by using command
http://192.168.0.248:8087/1/cmd/WLA%20on
After the wireless network has been successfully acti-
vated, the gauge is rebooted automatically. Using the
RS232 ASCII command WLA or the REST services
command
http://192.168.0.248:8087/1/cmd/WLA
Cube will send the answer on.
4.2.3 Changing IP Address of the Wireless Network
Precondition
Wireless network is activated and the WLAN USB adapter is
plugged in (the adapter is enclosed in the scope of delivery).