Manual

18 Operation
DISPLAY > MEAS. VIEW
DISPLAY > BRIGHTNESS
6.2.2 Settings
SETTINGS > TRIGGER > TRIGGER SEL.
S
ETTINGS > FAVORITES
Users with the access level OPERATOR, SUPERVISOR or INTEGRATOR can access the
favorites.
S
ETTINGS > SET UP > CONTROL UNIT > LANGUAGE
SETTINGS > SET UP > CONTROL UNIT > MESSAGES
Measurement view
mode
Type of graphic display
Diagram, bar graph
Show value Numeric representation of the measurements
Off, On
Display brightness Brightness of the display
20 ... 100%
Used trigger Leakage rate limit shown in the display
1...4
Favorite 1
To execute a frequently used function more quickly, you can
assign the function to the key F
AVORITE 1.
The key F
AVORITE 1 is the middle key on the measurement
display (see Fig: 4, page 14, No. 14).
CAL, Zero, Measurement view, Start/Stop, Display settings,
Volume, --- (= no function)
Favorite 2
To execute a frequently used function more quickly, you can
assign the function to the key F
AVORITE 2.
The key F
AVORITE 2 is the right key on the measuring display
(see Fig: 4, page 14, No. 13).
CAL, Zero, Measurement view, Start/Stop, Display settings,
Volume, --- (= no function)
Favorite 3
To execute a frequently used function more quickly, you can
assign the function to the key F
AVORITE 3.
The key F
AVORITE 3 is the key at the bottom right of the main
menu.
CAL, Zero, Measurement view, Start/Stop, Display settings,
Volume, --- (= no function)
Language Language of the display
German, English
Show warnings Activation of warnings on the display
Off, On