Manual

10 Description
1 - Rating plate
Rating plate of the control unit
2 -
Connection for headphones (impedance >= 8 Ω) or active speaker
3 - LCD-CAL
Calibration key for calibrating the touch display (can be operated with touch pin)
4 - LD
Connection for the data cable to the mass spectrometer module
4.2 Function
You can use the control unit to configure the mass spectrometer module LDS3000.
It also lets you output the data stored in the MSB box.
4.3 Technical data
4.3.1 Mechanical data
4.3.2 Electrical data
Fig: 2 Rear view
Dimensions (W x H x D) 106.2 mm x 128.4 mm x 49.2 mm
Weight 500 g
Supply voltage 24 V DC
Memory capacity for measured data 16 MB