User Manual

12 - 2
IPN 074-289L
Composer Operating Manual
CONCENTRATION
OUTOUT IN
POWER
OPTION
RS232
SYSTEM I/O
SENSOR
CONTROL
EARTH GROUND
CFGR1 CFGR2
POWER
RECEIVING
SENDING
HALT
WARNING
USER SET ZERO
TEMPERATURE
STEADY
CONCENTRATION
STATUS
COMPOSERGAS COMPOSITION CONTROLLER
For descriptions of LEDs,
see section 4.3.5.1.
NOTE: Basic information on
integration with a reactor is
given in section 1.10.4.
NOTE: 3.15 Amp
Type T fuse inside.
Grounding both
controller and
transducer is
recommended.
1 TRANSDUCER TYPE See section
1.10.5.5
2 COM CONFIGURATION
3 COM CONFIGURATION
4 COM CONFIGURATION
5 SPARE
6 USE FACTORY ZERO
7 PARAMETER LOCK
8 SPARE
1 CONCENTRATION OUTPUT
2 CONCENTRATION OUTPUT
3 CONCENTRATION OUTPUT
4 CONCENTRATION INPUT
5 CONTROL DILUTION FLOW
6 SPARE
7 5/10 VOLTS INPUT—ON is 5 volts full scale
8 CONCENTRATION/BULK FLOW—ON is Bulk Flow
SW# - FUNCTION See section 4.3.6.5. SW# - FUNCTION See section 4.3.6.6.
See section 4.3.6.8.
See section 4.3.6.9.
See section 4.3.6.10 and section 1.10.4.3.
See section 3.1.13 and 3.1.14 Analog I/O Option
See section 4.3.6.7.
See section 1.10.3.
OPTIONAL
POWER
SUPPLY
761-615-G1,G2
AC POWER LINE
K1 @ TEMPERATURE
K2 ERROR ON OPEN
K3 @ CONCENTRATION
K4* STEADY
K5* NON FACTORY
ZERO
*see section 3.1.13 for
Bulk Flow definitions of K4
RELAYS - See section 4.3.6.1.
1 SET REFERENCE ZERO
2 HOLD CONTROL OUTPUT
3 STOP CONTROL OUTPUT
4 START (Ext/In toggle in Bulk flow)
5 BYPASS
6 SPARE
7 SPARE
8 CHASSIS GROUND (required for
input activation)
INPUTS - See section 4.3.6.1.
IN OUT
S1 S2
See section 1.10.3.
Leak Check:
See section 5.6.
NOTE: Inlet is designed
to heat the incoming gas.
Max Flow 1800 sccm.
For description of LCD and
Overlay, see section 4.3.5.2
and section 4.3.5.3.
EARTH GROUND
See section 1.7.
24 VOLTS +/- 5%, 2.0 Amps.
INTERCONNECT CABLE
600-1096 P5, P10, or P20
TRANSDUCER
761-601
NOTE: Information on Bulk
Flow Control is given in
section 3.1.13.
See Table 6-7 for
error codes.
See Table 6-7 for
error codes.
Standard LED Controller
Optional LCD Controller
NOTE: A list of molecular weights
and specific heat ratios for common
gasses is given in Table 3-1.
Pressure range:
See section
1.10.5.1