Owner's manual

5 - 23
IPN 074-508-P1C
CMS5000 Operating Manual
5.7 Input Methods
In the Input/Output tab, up to four input methods can be selected. An input method
will begin when a relay contact, which has been integrated into the water/air control
system, triggers its start. Also, a method sequence can be selected as an input
method. See section 5.8 on page 5-25 for information on creating a method
sequence.
1 To enter input methods, click the appropriate Browse button. See Figure 5-49.
Figure 5-49 Input Browse Buttons
2 Double-click on the desired method from the method folder. See Figure 5-50.
Figure 5-50 Choosing Input Method