Owner's manual

16 - 11
IPN 074-508-P1C
CMS5000 Operating Manual
24 If Global is selected, enter the concentration of the standard in the data file in
the Conc/Factor column. See Figure 16-21.
Figure 16-21 Adding Concentrations using the Global Setting
25 When Global is selected, the Concentration Column in the center section will
automatically be set to 1. This column does not require further modification in
order to properly calibrate the standards. See Figure 16-22.
Figure 16-22 Concentration Column Using the Global Setting
26 If Analyte is selected, enter the individual concentration of each analyte into
the Concentration Column in the center section. See Figure 16-23.
Figure 16-23 Entering Concentrations using the Analyte Setting