Owner's manual

12 - 35
IPN 074-508-P1C
CMS5000 Operating Manual
Figure 12-66 Positioning Blue Triangle
2 Hover the mouse over a vertical line above the blue triangle and a double sided
horizontal arrow will appear. To set the baseline, click and hold the left mouse
button and move up the double ended arrow. Two blue lines will be displayed.
These lines will set the baseline range. See Figure 12-67.
Figure 12-67 Positioning Blue Lines
3 Once the background is selected, click Show Signal/Noise in the Range menu
to display the signal to noise values. See Figure 12-68.
Figure 12-68 Show Signal/Noise