Owner's manual

12 - 32
IPN 074-508-P1C
CMS5000 Operating Manual
Figure 12-59 Positioning Range Tool
3 Place the cursor on the gray line that is located on the desired peak. The cursor
will become a double-ended veritcal arrow. See Figure 12-60.
Figure 12-60 Range Arrow
4 To set the scan range, click and hold the left-mouse button, and move up the
double ended arrow. Two red lines will be displayed. Hover the mouse over the
red vertical line and a double-ended horizontal arrow will appear. Using the
double ended arrow, position the red lines at the beginning and the end of the
peak. These lines will set the scan range limits. See Figure 12-61.
Figure 12-61 Positioning the Red Lines