Owner's manual

12 - 20
IPN 074-508-P1C
CMS5000 Operating Manual
Figure 12-34 Relocated Base Point
6 Verify the update by opening Show/ Update Current Peaks. Refer to section
12.7.5.2, Show/Update Current Peaks, on page 12-18. Alternately, select
section 12.7.5.5, Label the Peaks, on page 12-21 to view the updated peak
area.
12.7.5.4 Clear the Peaks
The fourth option on the Peaks submenu is Clear the Peaks. Refer to Figure 12-26
on page 12-15. The Clear the Peaks option removes the peak identification arrows
and base points from the graph. See Figure 12-35.
Figure 12-35 Clear the Peaks