Owner's manual

12 - 7
IPN 074-508-P1C
CMS5000 Operating Manual
12.6.2 Summary Reports
The Summary report provides the method start date and time, the name of the
method file, the name of the tune file, a description of the method, the name of the
data file and the sample description if entered into the Data File Information window
(see section 12.5 on page 12-5). A list of compounds identified, the retention times
and the concentrations will also be displayed. The compounds listed will be in order
of their retention time. See Figure 12-11.
Figure 12-11 Summary Report
12.6.3 Quantitative Reports
A Quantitative report will be displayed for methods containing a calibration library.
The report will show the method start date and time, the compounds identified, the
predicted retention time, the actual retention time, the area, the concentration and
the limit. If the concentration is above the limit, it will be noted in the report. See
Chapter 15, Method Editor. The flag column will provide additional information
when necessary. For example, Area too low may be displayed in the Flag column,
if the area of the peak was lower than the method limit for peak area. See Figure
12-12.