Owner's manual

11 - 14
IPN 074-508-P1C
CMS5000 Operating Manual
The Data file increment digits is used to select the number of digits that are to be
appended to a data file. For example, selecting 2 would set up the file name to read
Method_yearmonthday_01. If 3 is selected, the file name would read
Method_yearmonthday_001. See Figure 11-24. This can also be selected in
Method Editor. See section 15.7, Data Page, on page 15-16 for instructions.
Figure 11-24 Data File Increment Digits
The Method Editor in Wizard Mode checkbox is the next option. See Figure
11-25.
Figure 11-25 Method Editor in Wizard Mode