Owner's manual

tira46e1 (2004-11) BPG402-SDv1.cp 9
Class Code 01
h
= 01
d
This object provides identification of and general information about the device.
Attribute ID Access Rule Name DeviceNet
Data Type
Description of Attribute Semantics of Values
1 Get Revision UINT Revision of this object.
Note: All class definitions are
required to include this class
attribute.
The current value assigned to this
attribute is one (01). If updates that
require an increase in this value are
made, then the value of this attribute
increases by one.
2 Get Max Instance UINT Maximum instance number of
an object currently created in
this class level of the device.
The largest Instance number of a
created object at this class hierarchy
level.
Attribute ID Access Rule NV/
V
Name DeviceNet Data Type Description of Attribute
1 Get NV Vendor ID UINT 79 02 Manufacturer identification
Value: 633 (INFICON)
2 Get NV Device Type UINT 1C
h
= Vacuum pressure gauge
3 Get NV Product Code UINT 12
4 Get NV Revision STRUCT
5 Get NV Status WORD
6 Get NV Serial Number UDINT
7 Get NV Product Name SHORT STRING BPG402-SD
Service Code Name Description
5 (05
h
) Reset 0 = last installation,
1 = default installation
14 (0E
h
) Get_Attribute_Single
Class Code 30
h
= 48
d
Attribute ID Access
Rule
Name DeviceNet
Data Type
Description of Attribute Semantics of Values
1 Get Revision UINT Revision of this object The current value assigned to this at-
tribute is one (01). If updates that require
an increase in this value are made, then
the value of this attribute increases by
one.
2 Get Max
Instance
UINT Maximum instance number of an
object currently created in this
class level of the device.
The largest Instance number of a cre-
ated object at this class hierarchy level.
2.2 Identity Object
2.2.1 Class Attributes
2.2.2 Instance Attributes
Services
2.3 S-Device Supervisor
Object
2.3.1 Class Attributes