Owner's manual

tira46e1 (2004-11) BPG402-SDv1.cp 5

The BPG402-SD uses a "Sealed Micro-Style Connector" for the DeviceNet con-

nection. The DeviceNet part of the gauge is powered via the DeviceNet connector.

Pin Function

1 Drain

2 +24 V nominal (range 11 … 25 V)

3V–

4 CAN_H

5 CAN_L

Pin Function

1 Setpoint A, relay common

2 Pressure output signal (0 … +10 V)

3 Threshold Setpoint A output (0 … +10 V)

4 Setpoint A, relay, n.o. contact

5 Supply sensor electronics common

6 Threshold Setpoint B output (0 … +10 V)

7 Degas input , high active

8 Supply sensor electronics +24 Volt

9 Setpoint B, relay common

10 Gauge identification

11 Setpoint B, relay, n.o. contact

12 Signal common GND

13 RS232, TxD

14 RS232, RxD

15 do not connect

1.3 Connectors on the

Device

Pin Assignment of the Sealed

Micro-Style Connector

Pin Assignment of the 15-pin

D-Sub connector