Owner's manual

4 tira46e1 (2004-11) BPG402-SDv1.cp
1 Starting-Up of the Slave
The BPG402-SD has to be powered with two voltages:
1. 24 VDC, 18 W at the 15 pole Sub-D connector for the gauge itself;
2. 24 VDC nominal, <2 W range (+11 … +25 V) at the DeviceNet micro style
connector for the DeviceNet transceiver.
1
2
3
4
5
6
7
8
Position Function
1 Address switch × 10, decimal
2 Address switch × 1, decimal
3 DeviceNet connector
4 Data rate switch
5 Network status LED
6 Module status LED
7 "Sensor cable" connector
(Power, analog I/O, RS232C I/O
and Relay contacts)
8 Filament status LED
1.1 Power Supply
Requirements
1.2 Front View of the
BPG402-SD