Owner's manual

14 tira46e1 (2004-11) BPG402-SDv1.cp
Data Component Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Device Exception Detail
Alarm Size
00000100
Device Exception Detail
Alarm 0 Pirani
00000000
Device Exception Detail
Alarm 1 Pirani
000000
Electronics
Failure
0
Device Exception Detail
Alarm 2 Hot cathode
0 0 0 0 0 0 Filament 2
Failure
Filament 1
Failure
Device Exception Detail
Alarm 3 Hot cathode
000000
Electronics
Failure
0
Manufacturer Exception
Detail Alarm Size
00000001
Manufacturer Exception
Detail Alarm
0000000
serial
comm.
Data Component Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Device Exception
Detail Warning Size
00000110
Device Exception
Detail Warning 0 –
Sensor Class Status
Extension
0 0 0 0 0 Underrange
Exceeded
Overrange
Exceeded
Reading
Invalid *)
Device Exception
Detail Warning 1
Pirani
00000000
Device Exception
Detail Warning 2
Pirani
0 0 0 0 0 0 Electronics
Warning
0
Device Exception
Detail Warning 3
Hot cathode
0 0 0 0 0 0 Filament 2
Warning
Filament 1
Warning
Device Exception
Detail Warning 5
Hot cathode
0000
Pressure too
high for
degas
000
Manufacturer Excep-
tion Detail Warning
Size
00000001
Manufacturer Excep-
tion Detail Warning
0000000
serial comm.
Warning
*) Logical inversion of Reading Valid.
These Boolean attributes are used to enable (1) or disable (0) the S-Device Super-
visor object’s process of setting Exception bits. When disabled, corresponding bits
are never set; and, if they were set, disabling clears them. Also, alarm and warning
states are not retained; when enabled, bits will be set only if the corresponding
condition is true.
The default state for these Enable attributes is enabled (1).
Device Exception Detail
Alarms and Manufacturer
Exception Detail Alarms
Format
Exception Detail Warning
Alarm Enable and
Warning Enable