Owner's manual

10 tira46e1 (2004-11) BPG402-SDv1.cp
Attribute ID Access Rule NV/
V
Name DeviceNet Data Type Description of Attribute
3 Get NV DeviceType SHORT STRING ASCII Text, "CG" combination gauge
4 Get NV SEMI Standard
Revision Level
SHORT STRING Specifies the revision level of the SEMI
S/A network standard to which the device
complies ( "E54-0997").
5 Get NV Manufacturer’s Name SHORT STRING "INFICON"
6 Get NV Manufacturer’s Model
Number
SHORT STRING BPG402-SD
7 Get NV Software Revision
Level
SHORT STRING ASCII Text, for example "xxxyyy"
xxx
version of the measuring print
yyy
version of the DeviceNet print
8 Get NV Hardware Revision
Level
SHORT STRING ASCII text, for example "1.001"
9 Get NV Manufacturer’s Serial
Number
SHORT STRING ASCII text
10 Get NV Device Configuration SHORT STRING Depending on device configuration
(→ Appendix B)
11 Get V Device Status USINT
→ "Semantics" section below.
12 Get V Exception Status BYTE
→ "Semantics" section below.
13 Get V
Exception Detail
Alarm
STRUCT of: A structure of three structures containing
a bit mapped representation of the alarm
detail
Common
Exception Detail
STRUCT of:
Size 2 USINT Number of common detail bytes
Detail 0 ARRAY of:
→ "Semantics" section below.
Detail 1 BYTE
→ "Semantics" section below.
Device Exception
Detail
STRUCT of:
Size 4 USINT
Number of device detail bytes 4
Detail 0 ARRAY of:
S-Analog Sensor Instance 1 (Pirani)
Sensor alarm byte 0
Detail 1 BYTE
S-Analog Sensor Instance 1 (Pirani)
Sensor alarm byte 0
Detail 2 S-Analog Sensor Instance 2
(Hot cathode) Sensor Alarm byte 0
Detail 3 S-Analog Sensor Instance 2
(Hot cathode) Sensor alarm byte 1
Manufacturer
Exception Detail
STRUCT of:
Size 1 USINT Number of Manufacturer detail bytes
Detail 0 ARRAY of: Serial communication alarm
2.3.2 Instance Attributes