User Manual
14 tina03e1-b (2004-02) BPG400 v1.om
Make the flange connection to the vacuum system, preferably without
applying vacuum grease.
When installing the gauge, make sure that the area around the con-
nector is accessible for the tools required for adjustment while the gauge
is mounted (→ 44, 47).
When installing the gauge, allow for installing/deinstalling the connectors
and accommodation of cable loops.
If you are using a gauge with display, make sure easy reading of the
display is possible.
The gauge is now installed.
• Allen key, size 2.5 mm
Unscrew the hexagon socket set screw (1) on the side of the electronics
unit (2).
2
1
3.1.1 Removing and Installing
the Electronics Unit
Required tools / material
Removing the electronics unit