User Manual

10 tina03e1-b (2004-02) BPG400 v1.om
Data rate
Data format
Connections (sensor cable connector)
TxD (Transmit Data)
RxD (Receive Data)
GND
9600 Baud
binary
8 data bits
one stop bit
no parity bit
no handshake
Pin 13
Pin 14
Pin 5
(Function and communication protocol of the RS232C interface →  31)
Fieldbus name DeviceNet
Standard applied
→  [6]
Communication protocol, data format
→  [1], [4]
Interface, physical CAN bus
Data rate (adjustable via "RATE"
switch)
125 kBaud
250 kBaud
500 kBaud
"P" (125 kBaud, 250 kBaud, 500 kBaud
programmable via DeviceNet
(→  [1])
Node address (MAC ID)
(Adjustable via "ADDRESS", "MSD",
"LSD" switches)
0 … 63
dec
"P" (0 … 63 programmable via
DeviceNet, →  [1])
DeviceNet connector Micro-Style, 5 pins, male
Cable Shielded, special DeviceNet cable,
5 conductors (→  22 and  [4])
Cable length, system wiring According to DeviceNet specifications
(→  [6], [4])
Fieldbus name Profibus
Standard applied
→  [7]
Communication protocol data format
→  [10], [7]
Interface, physical RS485
Data rate
≤12 MBaud (→  [10])
Node address
Local
(Adjustable via hexadecimal
"ADDRESS", "MSD", "LSD"
switches)
Via Profibus
(hexadecimal "ADDRESS" switches
set to >7d
hex
(>125
dec
))
00 … 7D
hex
(0 … 125
dec
)
00 … 7D
hex
(0 … 125
dec
)
Profibus connection D-Sub, 9 pins, female
Cable Shielded, special Profibus cable
(→  23 and  [5])
Cable length, system wiring According to Profibus specifications
(→  [7], [5])
RS232C interface
DeviceNet interface
(BPG400-SD)
Profibus interface
(BPG400-SP)