Manual

4 tira40e1 (2005-04) BCG450SDv1.cp
1 Start-Up of the Slave
The BCG450-SD has to be powered with two voltages:
1.) 24 Volt DC, 20 W at the 15 pole Sub-D connector for the gauge itself;
2.) 24 Volt DC nominal, <2 W range +11 … +25 V) at the DeviceNet micro style
connector for the DeviceNet transceiver.
1
2
3
4
5
6
7
Position Function
1 Address Switch × 10, decimal
2 Address Switch × 1, decimal
3 DeviceNet connector
4 Data Rate Switch
5 Network Status LED
6 Module Status LED
7 "Sensor cable" connector
(Power, analog I/O, RS232C I/O
and Relay contacts)
1.1 Power Supply
Requirements
1.2 Front View of the
BCG450-SD