Manual

tira40e1 (2005-04) BCG450SDv1.cp 11
Attribute ID Access Rule NV/
V
Name DeviceNet Data Type Description of Attribute
14 Get V
Exception Detail
Warning
STRUCT of: A structure of three structures containing
a bit mapped representation of the
warning detail
Common Exception
Detail
STRUCT of:
Size 2 USINT Number of Common Detail Bytes
Detail 0 ARRAY of:
→ "Semantics" section below.
Detail 1 BYTE
→ "Semantics" section below.
Device Exception
Detail
STRUCT of:
Size 7 USINT Number of Device Detail Bytes
Detail 0 ARRAY of: S-Analog Sensor
Class Level Status Extension
Detail 1 ARRAY of: S-Analog Sensor Instance 3
(Capacitance Diaphragm Gauge)
Sensor Warning Byte 0
Detail 2 BYTE S-Analog Sensor Instance 3
(Capacitance Diaphragm Gauge)
Sensor Warning Byte 1
Detail 3 BYTE
S-Analog Sensor Instance 1 (Pirani)
Sensor Warning Byte 0
Detail 4
S-Analog Sensor Instance 1 (Pirani)
Sensor Warning Byte 1
Detail 5 S-Analog Sensor Instance 2
(hot cathode) Sensor Warning Byte 0
Detail 6 S-Analog Sensor Instance 2
(hot cathode) Sensor Warning Byte 1
Manufacturer
Exception Detail
STRUCT of:
Size 1 USINT Number of Manufacturer Detail Bytes
Detail 0 Byte serial common warning
15 Set NV Alarm Enable BOOL
→ "Semantics" section below.
16 Set NV Warning Enable BOOL
→ "Semantics" section below.
This attribute represents the current state of the device. Its value changes as the
state of the device changes. The following values are defined:
Attribute Value State
0 Undefined
1 Self Testing
2 Idle
3 Self-Test Exception
4 Executing
5 Abort
6 Critical Fault
In case of a Self-Test Exception restart the device with a reset out of the box
(Identity Object Class 1, Instance 1, Service 5, Service target value: 1).
2.3.2.1 Semantics
Device Status