Owner's manual

4
tina40e1-b (2011-04)
Contents
Product Identification 2
Validity 2
Intended Use 2
Functional Principle 3
Trademarks 3
1
Safety 6
1.1 Symbols Used 6
1.2 Personnel Qualifications 6
1.3 General Safety Instructions 7
1.4 Liability and Warranty 7
2 Technical Data 8
3 Installation 13
3.1 Vacuum Connection 13
3.1.1 Removing and Installing the Electronics Unit 15
3.1.2 Using the Optional Baffle 16
3.2 Power Connection 17
3.2.1 Use With INFICON VGC40x Vacuum Gauge Controller 17
3.2.2 Use With Other Controllers 18
3.2.2.1 Making an Individual Sensor Cable 18
3.2.2.2 Making a DeviceNet Interface Cable (BCG450-SD) 21
3.2.2.3 Making a Profibus Interface Cable (BCG450-SP) 22
3.2.3 Using the Optional Power Supply (With RS232C Line) 23
4 Operation 25
4.1 Measuring Principle, Measuring Behavior 25
4.2 Operational Principle of the Gauge 27
4.3 Putting the Gauge Into Operation 28
4.4 Degas 28
4.5 Emission Control Mode 29
4.6 Atmosphere Switching Function 30
4.6.1 Functional Principle 30
4.6.2 Programming the Atmospheric Pressure Threshold 31
4.6.3 Wiring the relay "Atmospheric Pressure Reached" (BCG450) 32
4.7 Display (BCG450) 32
4.8 RS232C Interface 33
4.8.1 Description of the Functions 34
4.8.1.1 Output String (Transmit) 34
4.8.1.2 Input String (Receive) 36
4.9 DeviceNet Interface (BCG450-SD) 38
4.9.1 Description of the Functions 38
4.9.2 Operating Parameters 38
4.9.2.1 Operating Software 38
4.9.2.2 Node Address Setting 38
4.9.2.3 Data Rate Setting 39
4.9.3 Status Lights 39
4.10 Profibus Interface (BCG450-SP) 40
4.10.1 Description of the Functions 40
4.10.2 Operating Parameters 40
4.10.2.1 Operating Software 40
4.10.2.2 Node Address Setting 40
4.11 Switching Functions (BCG450-SD, -SP) 41
4.11.1 Setting the Switching Functions 41
5 Deinstallation 43