Owner's manual

16
tina40e1-b (2011-04)
In severely contaminating processes and to protect measurement electrodes opti-
cally against light and fast charged particles, replacement of the built-in grid by the
optional baffle (→  50) is recommended.
The gauge is deinstalled (deinstallation gauge →  43).
• Baffle (→  50)
• Pointed tweezers
• Pin (e.g. pencil)
• Screwdriver No 1
 Carefully remove the grid with tweezers.
 Carefully place the baffle onto the sensor opening.
3.1.2 Using the Optional Baffle
Requirement
Required tools / material
Installation