Owner's manual

tina40e1-b (2011-04)

 Remove the protective lid.

The protective lid will be needed for maintenance..

 Make the flange connection to the vacuum system

INFICON recommends to install the gauge without applying vacuum

grease.

Seal with centering ring

and baffle (Option)

When installing the gauge, make sure that the area around the con-

nector is accessible for the tools required for adjustment while the gauge

is mounted (→  41, 45).

When installing the gauge, allow for installing/deinstalling the connectors

and accommodation of cable loops.

If you are using a gauge with display, make sure easy reading of the

display is possible.

Procedure