Reference Guide

20 - 2
PN 074-558-P1A
3000 Micro GC Guides
4 Click Remove.
NOTE: Once a Standard GC module is decommissioned, it cannot be used until it is
recommissioned.
5 Click Remove next to the Standard GC module to decommission. A caution will display.
Click OK to decommission the Standard GC module.
6 Click Shutdown on the confirmation message. Allow three minutes for the instrument to
shut down.
7 Set the front panel power switch to the Off position.
Table 20-1 Changing a standard module (continued)
Step Description