Operating Manual Instruction Manual

9 - 7
PN 074-519-P1C
3000 Micro GC Operating Manual
TCD detector 'fault'
(continued)
Malfunctioning column or
injector
Check the flow coming out of the
3000 Micro GC analytical and reference
vents. If there is no flow from either or both
vents, contact INFICON.
Malfunctioning TCD Contact INFICON.
Method fields do not appear Instrument not properly
configurated
Re-configure the instrument through EZ IQ
Config.
Conflicting module
addresses
Ensure the DIP switch is set to the correct
address for enhanced modules.
Corrupted software file Re-install EZ IQ. Refer to the
074-537 EZ IQ Installation Guide.
Table 9-2 Common software problems (continued)
Symptom Cause Remedy