Operating Manual Instruction Manual

7 - 15
PN 074-519-P1C
3000 Micro GC Operating Manual
6 Click the Trigger tab and select the trigger Type for the type of remote start
installed in 3000 Micro GC. If there are no triggers on the system, select None.
See Figure 7-18. For instructions on how to use a trigger within EZ IQ, refer to
section 7.14, EZ IQ Operation to Activate Remote Start/Cancel Function, on
page 7-49.
Figure 7-18 Instrument setup window - trigger tab
7 To save the method, click File >> Method >> Save or Save As.