Operating Manual Instruction Manual

7 - 3
PN 074-519-P1C
3000 Micro GC Operating Manual
5 Double-click the INFICON 3000 Micro GC icon in the Configured modules
pane to open the INFICON 3000 Micro GC Configuration window. See Figure
7-4.
6 On the INFICON 3000 Micro GC Configuration window, click the
Connectivity tab. Type the 3000 Micro GC IP address. Click Load
Configuration from GC…. Once the 3000 Micro GC configuration has been
properly loaded into EZ IQ, a Configuration loaded successfully from GC
device message will be displayed.
Figure 7-4 3000 Micro GC configuration window
7 Click OK to exit the INFICON 3000 Micro GC Configuration window.
8 Click OK to exit the INFICON 3000 Micro GC Enhanced Driver window.
9 Click OK to exit the Instrument Configuration window.
10 Click Close to exit the EZ IQ Configuration window.