Operating Manual Instruction Manual

6 - 13
PN 074-519-P1C
3000 Micro GC Operating Manual
6.5 Change IP Address
6.5.1 IP Configuration
The 3000 Micro GC IP address can be changed through the embedded web page.
1 Open the web browser.
2 In the address bar, type the current IP Address of the instrument. Press Enter.
See Figure 6-17.
NOTE: At the factory, the instrument IP address was set to 10.1.1.101.
Figure 6-17 Internet Explorer address bar
3 The instrument embedded web page will display. Click the IP Configuration
tab. See Figure 6-18.
4 Click Make Changes. See Figure 6-18.
Figure 6-18 IP configuration page