Operating Manual Instruction Manual

6 - 10

PN 074-519-P1C

3000 Micro GC Operating Manual

4 Click Make Changes. See Figure 6-10.

5 When prompted for a user name and password, type gasconfig for both. See

Figure 6-11.

Figure 6-11 Gas type username and password

6 A window will then appear similar to Figure 6-12.

Figure 6-12 Example gas type selection window

NOTE: Entries m1 and m2 represent Channels A and B respectively. Entries

m3 and m4 represent Channels C and D, if installed.

7 Select the carrier gas connection under Connection corresponding to the

desired GC module. Click Submit

NOTE: In the example shown in Figure 6-11, carrier1 is assigned to modules

m1 and m2. Carrier2 is unused.

gasconfig