Instructions / Assembly

SAFETY CHECK

Check for leak

All connections on the patio heater have been

checked for leakage at the factory. In transportation

and handling some connections may have

loosened. Follow these steps to check the

tube/regulator/cylinder connections:

1) Make leakage solution by mixing 1 part liquid

dish soap and 3 parts water.

2) Spoon several drops (or use squirt bottle) of the

solution onto the tube/regulator/cylinder

connections.

3) Inspect the connections and look for bubbles.

4) If no bubble appears, the connection is safe.

5) If bubble appears, there is leak; loosen and

re-tighten this connection. If still leak, please

call customer service: 1-866-814-0585.

Disconnected cylinder when storage or

transportation

1) Turn the knob to OFF “ ” position.

2) Tilt the heater, turn clockwise to disconnect

cylinder from regulator. Put the heater uprightly

on the table.