1th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 Clip CH50 V2 Thermal Imaging Attachment User Manual V1.1 IRay Technology Co., Ltd. All rights reserved and shall not be copied and distributed in any form without written permission.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 Contents 1. Description .............................................................................................................. 4 2. Components and Controls .......................................................................................... 5 2.1 Components ..................................................................................................... 5 2.2 Controls ....................................................
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 10.1 User Interface Description ........................................................................... 24 10.2 Product Dimensions ..................................................................................... 24 10.2.1 Boundary Dimension ........................................................................ 24 10.2.2 Bottom Mounting Hole Size .............................................................
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 1. Description Clip CH50 V2 is a front attachment designed as the infrared expansion device of the day-light sight. Different from the night vision device based on image enhancement, Clip CH50 V2 doesn’t need external light source and isn’t influenced by strong light exposure.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 2. Components and Controls Fig. 2-1 Function introduction 2.1 Components No.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 2.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 8.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 4. Specifications Model Clip CH50 V2 Detector Parameters Detector Type Vox Uncooled Resolution 640*512 Pixel Size 12um NETD ≤40mk Frame Rate 50Hz Optics Parameters Objective Lens 50mm Field of View 8.8°×7.0° Recommended magnification of the day sight E-zoom ×1-×9 ×1 / ×2 / ×4 Detection Range (Target size: 1.7m×0.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 Digital Compass √ Motion Sensor √ Remote Control Bluetooth Physic Parameters IP Rating IP66 Weight (without batteries) ＜570g Dimension 175mm×74mm×68mm Adapter Ring M52×0.75 5. Product Characteristics and Function ⚫ 12μm thermal imaging detector ⚫ Detection range beyond 2.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 6. Operation System 6.1 Power on / Power off Press and hold down P (4) button for 3s to start up the device, the image appears on the display screen. After 6s, the device is turned on. Press and hold down P (4) button for about five seconds to shut down the device. 6.2 Standby Mode Enter/exit the standby mode with pressing the P (4) button briefly for power saving. 6.
th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 ⚫ Image sharpness: 1-4 levels of sharpness. ⚫ E-zoom: ×1/×2/×4. 6.5 Advanced Menu Press and hold down the M (5) button for three seconds to enter the advanced menu interface (fig. 6-2). The six functional options from top to bottom are Ultraclear mode, Bluetooth, video out, auto shutter calibration, image calibration type, battery type and more.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 weather conditions When Bluetooth is on, it can be operated with the Bluetooth remote controller Bluetooth ON/OFF or mobile phone APP The icon (please search for displays at the connection by mobile phone status bar. within 1 minute, otherwise, the Bluetooth will be automatically turned off ). Video Output ON/OFF Transfer the analog video in The icon PAL through the Type-C displays at the data cable. status bar.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 location E-zoom center adjustment Bad Pixel Correction Enter the E-zoom center adjustment interface align with day riflescope’s reticle bad pixels on Refer to 6.8 the image Restore factory Reset state Return to the main menu E-zoom center adjustment interface (fig. 6-4) Bad pixel Calibrate the Factory Return Shift the zooming center to 6-3) calibration interface (fig.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 6.7 Image Calibration When the device is installed on the day light sight as an infrared extension component, if the reticle of white light sight is not in the center of infrared image, the image calibration function can be used to shift the infrared image to ensure the position consistency between the white light image and infrared image. Fig.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 Note: Before zeroing function performs, please confirm the storage location, i.e., selection of the type of zeroing. (Refer to 6.5 for details) 6.7 E-Zoom center adjustment ➢ Please calibrate the image before adjusting E-zoom center. ➢ Hold down M (5) button to enter advanced menu, select E-zoom center adjustment option to enter the menu. ➢ In the adjustment menu, move white reticle until it overlap with day light scope’s reticle.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 calibrate the bad pixels. ➢ Repeat the above operations to continue selecting bad pixel, and the status bar at the bottom of the screen will display the number of calibrated bad pixels. ➢ When the calibration is done, press and hold M (5) button to exit the bad pixel correction. Fig. 6-5 Bad pixel correction interface 6.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 Fig. 6-6 Compass calibration interface 6.10 Stadiametric Rangefinder Stadiametric rangefinder is only for monocular mode that can estimate approximate distance to an object of known size. Fig. 6-7 Stadiametric rangefinder interface ➢ In the home screen, press and hold the P (4) and C (6) button for 3s at the same time to enter the stadiametric rangefinder interface (fig. 6-7).
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 entirely between the two measurement lines. P (4) button is used to increase the distance and C (6) button to reduce the distance. ➢ The distance to the target is automatically recalculated while moving the measurement lines and displayed on the left of the three reference objects. ➢ The center and color of the measurement lines is the same as the reticle. ➢ Exit the rangefinder mode with a long press of the M (5) button.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 7. Accessory Equipment Fig. 7-1 Remote controller Clip CH50 V2 is equipped with external devices that can be connected via bluetooth. The button layout of the bluetooth remote controller and mobile phone APP is consistent with the device, including Power button, menu button and correction button. The functions and operation methods are also corresponding with the device. (Refer to figure 7-1 and 7-2 for details) 7.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 7.2 Mobile App ➢ Download and install the APP named Xinfrared BC from Google play on your smart phone. ➢ Turn on the bluetooth of the device and the bluetooth icon will show at the bottom of the screen. ➢ Open the APP, select and connect with the device within 1 minute until the message “connect device success” appears on the top of the APP interface. ➢ And at the same time, the bluetooth icon on the device turns to .
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 8. Preventative Maintenance 8.1 Battery Installation ➢ When the icon is appeared on the status bar, please replace with new batteries; ➢ It is necessary to power off before replacing the batteries. ➢ Turn the battery compartment knob (10) in a counterclockwise to open and remove it. ➢ Install two CR123 batteries correctly according to electrode instructions on the label inside the battery compartment as shown in fig. 8-1.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 7 hours, referring to the fig.8-2. Fig. 8-2 Installed diagram of the 16650 batteries 8.2 Product Cleaning and Maintenance ➢ It is prohibited to clean the device with the cleaning tool which may corrode or scratch optical glass. ➢ The unit can be scrubbed with soft cloth by dipping certain amount of alcohol.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 9. General Trouble Shooting Table 9-1 General trouble shooting Description Probable cause The focal length of the Image blurring objective lens does not suit. No image calibration for a long time. Trouble shooting Adjust the focal length of objective lens until the image becomes clear. Perform image calibration. Adjust the sight distance of Blurred vision Sight distance inadequacy. eyepiece until image becomes clear.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 10.Appendix 10.1 User Interface Description ⚫ Custom interface and data cable are adopted to support type-c power supply, serial port and PAL video. ⚫ Support type-c and battery power supply, support over-voltage and under-voltage reverse connection protection. 10.2 Product Dimensions 10.2.1 Boundary Dimension All rights reserved and shall not be copied and distributed in any form without written permission.
11th Guiyang Street, YEDA, Yantai 264006, P.R. China +86-400-998-3088 10.2.2 Bottom Mounting Hole Size All rights reserved and shall not be copied and distributed in any form without written permission.
