Tus neeg siv phau ntawv

AT31F61F Online Temperature Measurement Thermal Camera User Manual

9. Quick Start Guide

Please follow the steps:

1. Install IRT_VMS if the thermal camera is with other networking equipments, and

IRT_TAS_AT can be installed on a single thermal camera for temperature

measurement and analysis. The software may have version updates. Please refer to

the actual version. It is recommended that the computer configuration for installing

the software meet the following conditions: i5-9500T and above CPU, 8G and above

memory, 64-bit win10 system, and supporting Gigabit network.

2. Connect the thermal camera, power supply and computer.

3. Set the computer configurations according to the software instructions for

IRT_VMS_User Manual or IRT_TAS_AT_User Manual.

4. Double-click the client icon, enter the correct user name and password, and click

5. Select the IP on the client homepage, and add the module number you want to

preview to the PC preview interface. If the thermal camera is successfully connected,

you can start imaging and monitoring with the thermal camera.

6. The 232 transmission between the computer and the thermal camera can be

realized through the RS232 interface on the cable.

7. The 485 transmission between the thermal camera and the PT can be realized

through the RS485 interface on the cable to contron the PT.

8. The ALARMIN interface on the cable can be used to manually input signals to

trigger the alarm.