Technical Manual

34 - IP Reader
Setting Descr iption Value Card T ypes Behaviour
Setting 1
IP reader w ill read the
follow ing protocols:
EM4x02, E M 4x05,
EM4x50, hitag1, hitag2,
Q 5 and Ti-RF ID.
Because of the emulation
of the EM 4x02 card and
the E M4x05 card by the
Q 5 card, these different
settings of S etting 1 are
supported.
0
EM4x50, hitag1,
hitag2, Q 5 and Ti-
RF ID
-
1 EM4x02, E M4x05,
EM4x50, hitag1,
hitag2 and Ti-RF ID
-
3 EM4x02, E M 4x05,
EM4x50, hitag1,
hitag2 and Ti-RF ID
The card data of the
EM4x02 cards will be
processed and send in
rev ersed order.
5 EM4x02, E M4x05,
EM4x50, hitag1,
hitag2 and Ti-RF ID
The card data of the
EM4x05 cards w ill be
processed and send in
rev ersed order.
7 EM4x02, E M4x05,
EM4x50, hitag1,
hitag2 and Ti-RF ID
The card data of the
EM4x02 and EM4x05
cards w ill be processed
and send in rev ersed
order.
Setting 2 Not applicable - - -
Setting 3 Not applicable - - -
Data 1 Not applicable - - -
Data 2 Not applicable - - -
Warning: Processing and sending of data in reversed order not
tested for the EM4x05 cards.
Setting Description Value Car d T ypes
Setting 1
The M ifare reader supports the 4
by tes Mifare card serial number and 7
by tes Desfire card serial number.
Setting 1 w ill be used to determine if
the order of the 4 by tes M ifare card
serial number should be rev ersed.
O nly 4 by tes of the Desfire card seria
l
number are used to calculate the
decimal card number.
0
C ard serial numbe
r
is calculated from
the raw data in the
rev ersed order.
1
C ard serial numbe
r
is calculated from
the raw data in the
normal order.
Setting 2 Not applicable - -
Setting 3 Not applicable - -
Data 1 Not applicable - -
Data 2 Not applicable - -