User's Manual

Technical Document
<Tag Here>
Indyme Solutions, Inc. 8295 Aero Place  San Diego, CA 92123 USA +1.858.268.0717  +1.800.829.6141Page 4 of 7
Menu-8: Frequency Plan Mode
Assigns the designated frequency spectrum to the call box. All call boxes and access points must have
the same Frequency Plan to communicate.
After entering the Programming Menu;
Press the SET button eight times for Menu-8, RESET once to save.
The assurance LED will flash eight times to indicate Menu-8 was selected.
Press the SET button to select a Frequency Plan: <1, 2, 3 or 4>, RESET once to save.
The assurance LED will flash to indicate the selected Frequency Plan.
The four Frequency Plans are as follows;
 (1) FP01 Europe -868.175MHz
 (2) FP02 USA/Australia -918.000MHz
 (3) FP03 USA/Australia -918.100MHz
 (4) FP04 USA/Australia/Singapore -920.000MHz
Call Box Assembly Instructions
1. The CB960 Call Box is shipped as two separate pieces; the CB960 Call Box module and the SPA1xx
Sign Blade. Sign Blades may be provided by the customer and shipped separately. See your work
order for details.
2. Locate the SPA1xx Sign Blades. Verify you have one sign blade for each CB960 Call Box.
3. Open the CB960 Call Box module by removing the rubber band.
4. Separate the two sides from the button module.