User's Manual

Indyme Solutions, Inc. 8295 Aero Place  San Diego, CA 92123 USA
+1.858.268.0717  +1.800.829.6141
Page 3 of 10
Install Document
02-19-2016
Smart Sense Touch (DM9025)
TEMPORARILY, place the device in the designated
mounting location to test operation and RF signal.
It may be necessary to change this location to ensure
adequate coverage of the product-location.
Follow the steps outlined on the SmartPortal webpage.
Follow the instructions
highlighted in blue to
see the first Touch
Sensor.
Select the appropriate location
for the device. The profile field
will auto populate. Tap
configure.
DO NOT INSTALL THE DEVICE
WITHOUT AN INITIAL TEST. Test the
Touch device in the area where you
plan to mount it.