User's Manual

FUNCTIONAL DESCRIPTION

1. Overview

The CU5300 is the latest hardware control unit developed by Indyme to be the central interface for the Global

Solution Family (GSF) of Smart Sense Devices, legacy Call Boxes, and Shopper Help Buttons. The

CU5300/5302W offers an easy to configure and install solution for rapid deployment of a completely integrated

system offering.

The CU5300 accepts triggers from GSF help buttons and Smart Sense devices over the network via CB451 or

CB951 transceivers. The default configuration provides support for ten (10) call boxes and four (4) CB451

receivers.

Once configured, the controller provides the alarm engine and messaging inputs for connected GSF and

Director call boxes, and Smart Sense devices.

2. Startup Sequence

The CU5300 startup sequence begins from a bootloader located in a partition on a local SD card. This is the

code that runs prior to the application software and initiates the Linux kernel in the controller. After the power

up sequence completes, a properly configured CU5300 will sit in standby mode until it receives an input from

the network or via a web-based GUI using a compatible web browser. All GUI functionality resides within the

control unit and is not downloaded by the web browser.

SUPPORTED FUNCTIONS

1. Input Compatibility

The CU5300/5303W

• Accepts event triggers from a network device (POS terminal) or wireless device (shopper help button)

• Accepts event triggers from GSF help buttons, Smart Sense devices and QuickLink over the Ethernet

port