User Guide

Ref. IS.MDuino.42+ Rev. 1: 30-08-2019

- Tighten the screws of the terminal ports and the screws of the connectors within the

prescribed tightening torque. Insufficient tightening can lead to loose parts or wires

and cause malfunctions. Excessive tightening can damage the screws and / or the

module, with the risk of falling, short circuits and malfunctions.

- Before handling a module, dispose of the electrostatic charge accumulated by the

human body by touching a suitable conductive object. Failure to observe this

precaution may cause faults or malfunctions of the module.

Repair note:

If the equipment is suitable to be repaired, it must be verified that the equipment

remains in a safe state after repair.